Door buying & measuring guides
Match the door to the opening. Get the measurements, hardware and delivery details straight before you put in a request.
Choose a door
Sort out the type, material, condition and hardware that make sense for your opening.
- How to Choose an Exterior Door
Compare exterior door packages by frame, threshold, swing and exposure before you choose a material or finish for the entrance.
- Pick the Right Interior Door for Each Room
Choose interior doors for bedrooms, bathrooms and busy rooms by checking privacy, swing clearance, frame condition and daily use.
- Slab vs. Prehung Doors: Which Do You Need?
Decide between a door slab and a prehung unit by checking the existing jamb, hinge cuts, latch position and rough opening.
- What to Check on a Steel Entry Door
Shop steel entry doors with a close look at the faces, edges, hardware prep, finish instructions and the frame around the slab.
- Choosing a Fibreglass Entry Door
Learn what to compare on fibreglass entry doors, from the surface and finishing system to jamb construction, edges and door lite options.
- Buying a Wood Door: Finish, Fit and Upkeep
Evaluate a wood door by its construction, edge treatment, expected upkeep, entrance exposure and compatibility with your opening.
- Should Your Door Be Solid or Have Glass?
Compare solid and glazed doors using privacy sightlines, the light an opening receives, glass position and the exact unit's specifications.
- Privacy Glass for a Door: What Can You See Through?
Compare textured and obscured door glass using a simple day and evening visibility test before picking a pattern or glass position.
- French Doors: Check How Both Leaves Work
Before buying French doors, confirm the active leaf, clear passage, sweep of each door and how the pair latches and seals.
- Sliding or Hinged Patio Doors? Check the Space
Choose a patio door by checking the usable passage, operating panel, sweep clearance, screen and sill against how you use the opening.
- Buying a Front Door With Sidelights
Measure and compare a front door with one or two sidelights by checking the complete assembly, glass sightline and junctions at the sill.
- Unfinished or Primed Doors: What Work Is Left?
Compare unfinished and primed door surfaces, verify the right coating for each, and check which faces, edges and cuts still need finishing.
- Left or Right? How to Check Door Handing
Record a door's hinge side, swing direction and viewing side so you can verify its handing against the seller's drawing.
- Will Your Lock and Handle Fit the New Door?
Check door thickness, bore, backset, latch and strike before you reuse a lock or choose hardware for a replacement door.
- Match the Hinges on a Replacement Door Slab
Measure hinge locations, leaf sizes, corner shape, depth and bevel before buying a slab for an existing door frame.
- How to Inspect a Clearance Door Before Buying
Separate cosmetic marks from fit or hardware problems when checking a clearance door, and record what comes with the unit.
- What's Included When You Buy a Door Unit?
Read a door package as a parts list. Confirm the frame, sill, seals, hinges, latch, trim and screen before comparing assemblies.
- How to Compare Two Door Spec Sheets
Compare door drawings and specification sheets using the same size basis, operating layout, performance information and included parts.
- How to Measure for a Replacement Door
Record leaf, frame and opening measurements the right way before selecting a replacement slab, complete door unit or matching hardware.
- Hollow Core or Solid Core for an Interior Door?
Compare hollow core and solid core doors by weight, sound around the opening, compatible hinges and the way the room is used.
- Door Options for Tight Hallways and Closets
Choose hinged, folding or sliding doors for tight rooms after checking the swing path, wall space and usable opening with the door open.
- Choosing a Sill and Threshold for an Exterior Door
Choose a compatible exterior threshold by comparing finished floor levels, the sill cross-section, drainage and how the door seals against it.
- A Door Buying Checklist for the Final Order
Confirm the selected door, measurements, parts, condition and transport before ordering, with a compact checklist you can take to the shop.
Measure, fit and get it home
Check dimensions, swing, access and the details a supplier or installer will need.
- How to measure a door slab
Measure the actual width, height and thickness of an existing door slab before shopping for a replacement leaf.
- How to measure a door rough opening
Identify the framed opening behind the trim and record its width, height and reference floor for a door unit.
- How to prepare for door installation
Prepare the opening, access and scope for a door installation visit without pulling out the existing door prematurely.
- Door measurements in inches and millimetres
Convert door measurements between imperial and metric while keeping nominal names and actual dimensions separate.
- How to measure for a 30-inch door
Check the real slab and passage dimensions before requesting a nominal 30-inch replacement door.
- How to measure for a 32-inch door
Compare a nominal 32-inch door leaf with the existing frame and usable clearance before choosing a replacement.
- How to measure for a 34-inch door
Verify an apparent 34-inch door size without rounding the existing slab or guessing the frame dimensions.
- How to measure for a 36-inch door
Check whether a nominal 36-inch slab or complete door unit suits your opening, trim and access path.
- How to measure an 80-inch door height
Check a nominal 80-inch door against the slab, sill and finished floor at the actual replacement opening.
- Can you reuse an existing door jamb?
Inspect the existing door jamb before planning to replace just the slab, including hinges, stops and latch alignment.
- How to measure door jamb depth
Measure door jamb depth across the wall thickness and identify finishes that could change the required depth.
- How to measure an existing door frame
Record the outside size of a door frame where it is visible and distinguish it from the trim and rough opening.
- How to check door swing and handing
Record the hinge side and opening direction from a named viewpoint so you can confirm the correct door variant.
- How to measure door hinge positions
Measure hinge size, position and recess shape when fitting a replacement slab to an existing frame.
- How to check door lockset backset
Measure the lock backset, bore and strike position before choosing a replacement door that will reuse hardware.
- How to measure a door threshold
Record the width, rise and floor transitions at a door threshold before asking about a replacement assembly.
- How to check door weatherstripping fit
Locate gaps around an exterior door and record the existing seal before requesting a compatible replacement.
- How to measure door swing clearance
Check floor, side and overhead clearance along a door's actual swing path before confirming the opening direction.
- How to measure an out-of-square door opening
Record uneven sides, height changes and diagonal readings so an installer can check an out-of-square opening.
- Which photos help with a door quote?
Take clear, useful photos of the whole opening, hardware and measurements for a door fit or installation inquiry.
- How to transport a door for pickup
Check package dimensions, vehicle openings and handling instructions before collecting a door or door unit.
- How to prepare for door delivery
Check the drop-off point, stairs and tight turns before asking for a door delivery quote.
- What to send for a door quote
Build a door quote request with the size basis, swing, parts to retain, work scope and the way you want to receive it.