CHEAP
DOORS.

How to measure door hinge positions

Use a common reference point for every hinge so the seller can compare your notes with the preparation on the replacement slab.

Use the same reference edge

Measure on the existing slab, using the top edge as the starting point for each vertical reading. Specify whether your tape stops at the top of each hinge plate or at another edge. Take an individual reading to every hinge instead of assuming the spacing is even. Photograph the door edge with the hinges visible so the measuring face and numbering are clear.

Record the height of each hinge leaf and the number of hinges. Look at the shape of the recess corners and whether the plate sits flush. If the existing hinge is hard to measure without removing it, leave it in place and note what is uncertain.

Compare the prep on both sides

A frame that stays in place dictates where the hardware must meet. Ask whether the new slab is prepared, supplied blank or has only some hardware work done. If you are replacing the frame as well, ask what hinges are supplied and whether the pictured hinge prep corresponds to the variant being quoted.

  • Send a clear photo of one full hinge recess and a wider photo showing all the hinge positions.
  • Keep the slab thickness and swing description with the hinge measurements.