CHEAP
DOORS.

How to measure for a 36-inch door

A wide entry door can come as a single leaf, a complete frame or part of an assembly with other panels. Confirm what the 36-inch label actually describes.

Identify the part you need

Open the existing door and measure the leaf at several heights if you are replacing only the slab. For a complete replacement, record the outside frame where it is visible and note what hides the rough opening. A sidelight, an inactive second leaf, exterior cladding or wide casing can make the assembly look larger than the unit being replaced. Photograph those details from both sides.

If you need clearance for furniture or equipment, measure the route with the door open to the position it can actually reach. Take note of the open leaf, a projecting handle, raised sill and any tight turn just beyond the door.

Check access for the packaged unit

Ask for the packaged dimensions and weight before collecting the door. The package can be larger than the leaf, especially when a frame is included. Measure the smallest vehicle opening or the route to the installation site. If the site has steps, gates or a tight turn, tell the store which points are narrow so the pickup or delivery plan can be checked.

  • Describe fixed side panels separately from the moving leaf.
  • Record the package size and the vehicle or route dimensions beside your opening measurements.