Convert the reading, not the label
One inch equals 25.4 millimetres. Multiply inches by 25.4 to get millimetres. Divide millimetres by 25.4 to get inches. When a tape shows a fraction, convert the fraction before multiplying. For example, 32 and one half inches is 32.5 inches, which equals 825.5 millimetres.
If the product is sold by a nominal inch name, keep that product name in your note, but compare the actual size from the listing. A converted 813 millimetres may be a rounded copy of 32 inches. It could also be an actual measurement taken at a different point. Ask what was measured and which number came from the tape.
- 30 in = 762 mm
- 32 in = 812.8 mm
- 34 in = 863.6 mm
- 36 in = 914.4 mm
- 80 in = 2,032 mm
Send one clear set of readings
When asking for fit help, give the original reading and unit first. Label the line as slab, outside frame or rough opening. Put any converted value next to the original and retain meaningful fractions or decimals. If a tape gives different readings across the opening, convert the individual readings. Do not average them into a single number that hides a narrow point.