CHEAP
DOORS.

How to check door weatherstripping fit

Weatherstripping works with the door, stops and threshold. Look for where the seal fails before deciding which part to replace.

Find where the door stops sealing

With the door closed normally, inspect the top, latch side, hinge side and bottom. Look for torn, flattened or missing material and note where the light or draft appears. Open and close the door once more to see whether it makes even contact. If the slab rubs or has to be pulled hard to latch, tell the supplier. A thicker seal alone may not correct a fit or alignment issue.

Look at how the current seal is held. It might be attached to a stop or pressed into a groove. Photograph its shape at an exposed end without pulling out a working seal. Record which side or edge the photo shows.

Check the seal's match

If you know the frame or door model, include it when asking for a replacement seal. Ask whether the supplied unit includes side seals and a bottom sweep, and whether the bottom component is designed to meet the threshold. If you are keeping the frame, ask the installer to confirm how the door closes against the new seal.

  • Send a close photo of the seal and a wider image locating the gap.
  • Note whether the problem occurs at one point or along the full edge.