Look at the side that holds the hinges
Open and close the old door slowly and watch for movement where hinges attach to the frame. Note any loose hardware, visible damage or a section that moves when the door is operated normally. Check where the leaf meets the stops and whether the latch finds the strike without lifting or pushing the door against the frame. A rubbing or sagging door may need a frame assessment before another slab is chosen.
Record the thickness of the current slab and the locations and sizes of the hinge recesses. Include a photo of the strike and of the old door's edge at the latch. If the jamb is warped, decayed or splits at hardware, ask whether it should be replaced.
Keep a matching list
If the frame appears usable, send the slab size, handing description, hinge sizes and positions, latch preparation and the edge clearances where they vary. Confirm whether a new slab comes blank or prepared. Prepared holes that do not line up with the old frame can make it a poor match even when the slab dimensions are close.
- List which trim and weather seals, if any, you need to retain.
- Ask who will verify the old frame and confirm how the slab will be fitted.