Match the finish to the exact surface
Start with whether you want paint, stain or a clear finish. Ask what surface lies under the primer or bare face and which coating the supplier specifies. A door shown as paint-ready may have a surface that takes stain unevenly. If you are staining, get a sample of the same face material and test the colour before committing to a whole batch.
Inspect all the edges
Turn the slab enough to see the top and bottom. Check whether they received the same preparation as the faces. Confirm what to do with the hinge recesses, bore and any cut ends after fitting. Pay special attention to the finish instructions for exterior exposure and whether any faces or edges require coating before hanging.
Plan how you'll do the work
Decide where the slab can lie flat, how it can dry without touching the finished faces and when the hardware will go in. Keep a note of the coat sequence and the time allowed between coats. Ask how long the primed face can sit before it needs a topcoat. Confirm how to fill handling marks in the primer.