Separate measurement from product identification
Check whether the tape ran across the leaf, between the stops or across the opening with the door ajar. If you can measure the slab itself, take three measurements and note whether the hinge or latch edge has a bevel. Keep the fractions. A leaf that varies across its height can tell a different story from a flat 34-inch reading somewhere in the frame.
Check both side heights and the thickness, and note changes at the floor. A new finish floor, rug or raised threshold can matter even if the current door has the correct nominal width. Record the current finished surface and any planned change instead of adjusting the height on paper.
Ask for the listing's actual dimensions
Check the exact listing against the part you are replacing. If keeping the jamb, compare the leaf size and thickness, hinge positions and latch preparation. For a framed unit, compare the outside frame dimensions with the verified rough opening. If a reading looks unusual, include a picture of the tape at the reading so the supplier can see the measuring points.
- Write the closest nominal size only as a search term.
- Keep actual readings, including fractions, on a separate line for the fit check.