Check an existing 32-inch replacement
Open the door far enough to measure the leaf without including the doorstop. Take readings at the top, middle and bottom, then label the minimum and maximum rather than reporting only a rounded nominal width. Check height and thickness as well. If the doors in the home look alike, measure the actual opening involved. The room beside it may have a different frame or hardware prep.
On a replacement unit with a frame, look for the manufacturer's outside dimensions and installation range. Do not assume a unit with a 32-inch leaf will fit the same opening as another unit with the same label. Include whether you are measuring a finished doorway or exposed framing.
Measure the route when clearance is the reason
If you need room to move something through, measure between the actual obstacles with the current door open. The edge of the open leaf, lever and stop can take up space. Include any immediate turn on either side as a separate check. A purchase decision should use confirmed unit dimensions, not an assumption based on the nominal width.
- Send a photo with the door open and a note about the narrowest part of the route.
- Say whether you are matching the existing layout or trying to gain clearance.