CHEAP
DOORS.

How to measure for a 30-inch door

A 30-inch label is a way to find a candidate. The current slab, the frame and the space available to walk through it can each have different widths.

Start with the width that matters to you

For a slab-only replacement, measure the old leaf across the face at several heights with the door open. The inside distance between the stops is a different reading. If it is the passage you want to improve, open the door to its normal limit and measure the narrowest usable distance across the route, taking note of where the leaf or hardware projects.

On a narrow doorway, check why the passage is limited. A wall, baseboard, cabinet or doorstop may prevent the leaf from opening far enough. A matching-width replacement may leave the same pinch point. Photograph the obstructing item with the door open as it is normally used.

Bring the usable widths to the request

Write down which problem you are solving. If you are keeping a frame, send the slab height and thickness plus hinge and latch measurements. If you are trying to gain passage, send the existing usable width and the width you need to pass an item. A door seller can help match listed parts, while a contractor can check whether changing the frame or swing is appropriate.

  • Mark the narrowest reading and label it as slab, frame or usable passage.
  • Avoid converting your target passage width into a purchase size without checking the exact product assembly.