CHEAP
DOORS.

How to measure an 80-inch door height

An 80-inch label generally describes a nominal product size. The usable height depends on the part measured and the bottom surface used as a reference.

Use one clear bottom reference

For a slab, measure between the actual top and bottom edges at both sides. If a sweep or attached seal covers the bottom edge, flag whether your reading includes it. For a replacement frame, identify the sill or support surface that the unit will sit on. Measure to the top of the opening at more than one point and explain if the framing is hidden.

Check whether a flooring change is planned, including an underlay, tile or a transition strip. Measure the current finished level and describe the future one separately. Also note whether the existing threshold is raised or sloped. Mark which reading came from the highest point of the transition.

Confirm the complete unit height

Compare slab dimensions with slab dimensions and frame or rough opening dimensions with the manufacturer's information for the whole unit. Do not trim a slab based only on a nominal height. Construction, weather seals and the maker's instructions can restrict what may be adjusted.

  • Record both side heights separately when they differ.
  • Take a clear picture of the threshold and any flooring transition that affects the bottom clearance.