Follow the path of the leaf and hardware
Open the current door slowly and note where the outer corner and handle travel. Look for trim, nearby doors, radiators, cabinets and stops that cut into the path. A handle can strike a wall or fitting before the edge of the leaf reaches it. Mark the point of contact on a sketch or take a photo of the closest approach.
Check the floor through the same arc. Rugs, changes in level and raised transitions can affect clearance even when the threshold itself is low. Note any planned flooring change and say whether the door clears the current floor throughout its movement.
Record clearance for the intended swing
Measure the route with doors and furniture in the positions they actually occupy. If a new swing direction is proposed, send a photo of that side of the opening as well. For the replacement unit, ask what the usable passage will be at the intended opening angle and whether the installed hardware or stops affect it.
- Record current and proposed movement separately.
- Describe the narrowest usable passage and any obstacle that limits how far the door opens.