Take a photo from a known side
For an entrance, take one photo from outside with the leaf partly open. Label the photo as the exterior view and mark the hinges on the image. Draw an arrow showing whether the door moves toward or away from the camera. For an interior opening, write down the room or hallway where your feet were when you took the photo. Repeat the same steps for any second leaf.
Check the sweep against the room
Hold the old door fully open and note where the handle ends up. Look for a wall, toilet, switch, step, screen door or handrail that could limit the new leaf. When replacing the frame as well, consider any planned change to the swinging side before you order. The position of the stops, hardware prep and seals may be specific to the chosen swing.
Compare the exact drawing
Ask which side the product drawing uses and set it beside your marked photo. Check hinge side, handle side and swing against the drawing together. If a corner limits the sweep, take a second photo from the latch side. Save the accepted diagram with your measurement notes.