Find the faces you are measuring
Measure between visible framing faces where the old unit has been removed or the structure is accessible. If trim and an existing unit hide the framing, record the visible frame or finished opening and label it honestly. A photo of the top and sides helps a supplier tell which measurement you have. Do not remove trim just to make a first inquiry if it would damage the finish or disturb wiring or other work.
For an exposed opening, take width readings near the top, middle and bottom. Measure from the support surface at the bottom to the framing above at the left, centre and right. Note whether there is flooring, a raised sill or a proposed change to the floor height.
Check the unit specification
The opening measurements need to be compared with the manufacturer measurements for the full unit. A nominal door leaf width is not the frame width. The fitting space depends on the unit and how it will be installed. Send the range of readings and a picture of the sill if the opening varies, and have the installer confirm the final size before ordering.
- Mark the readings as rough only when you could see the framing faces.
- Record the two diagonals if the opening looks skewed.